Jump to content
Sign in to follow this  

[HELP] Side Mirror LED wiring?

Recommended Posts

So I've got mirror covers like this: 


and have completed the mechanical installation.

Just wiring left.

I managed to find these instructions on ft86speedfactory for the US versions:



The wires below are located in HD1. This is the plug on the driver's side.

- The white wire is the passenger side (right) turn signal (positive).

- The yellow wire w/ green stripe is the driver's (left) turn signal (positive).2013-frs-brz-turn-signal-mirror-install-lg-1.thumb.jpg.82015ab72584221a2c0002c17fa1b360.jpg

But our RHD version have different wiring colours:


I'm not sure which to tap into. But also, those instructions don't mention the DRL wiring.

I've also found the Chargespeed and Avest instructions, but they use the LED relay wires instead and get extremely vague right at this section.

Chargespeed seems to be suggesting this (but without clear pictures):


While Avest suggests the same LEFT+ and RIGHT+ as above, but tells you to connect the DRL elsewire entirely??

Anyone done this before would like to chime in?

Many thanks in advance.



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...